Macros
#define	TIMING_NUMBER 2
	Timer to use for Timing Module Timing module. More...

#define	UART_INTERRUPT_PRIORITY 3
	default for UART interrupt priority (valid values are 1-7)

#define	UART1_TX_PIN RPA0
	default for UART2_TX_PIN

#define	UART1_RX_PIN RPA2
	default for UART2_TX_PIN

#define	UART2_TX_PIN RPB10
	default for UART2_TX_PIN

#define	UART2_RX_PIN RPB11
	default for UART2_RX_PIN

Detailed Description

All defines are optional (i.e. have default values) except for FCPU. Defines should be located in system.h.

Macro Definition Documentation

#define TIMING_NUMBER 2

Timer to use for Timing Module Timing module.

NOT REQUIRED

Timer number to use for the Timing Module. Default is Timer 2. Possible values are (1), 2-5

Warning: May not work on Timer 1 since Timer 1 functions different than the other timers. Should be tested if Timer 1 is used and hal_timing.c may need modification.